锅支架高度对燃气灶性能的影响规律

Effect Law of Pan Bracket Height to Gas Stove Performance

中文关键词: 燃气灶  数值模拟  锅支架高度  热效率  CO浓度

英文关键词: Gas stove  Numerical simulation  Pot support height  Thermal efficiency  CO concentration

中文摘要:

      基于组分传输与反应模型,建立了大气式燃气灶燃烧过程数值模型,其中湍流采用Realizable k-ε模型,辐射采用DO模型,燃烧采用涡耗散模型。对不同工况下燃气灶燃烧过程进行三维数值模拟计算,研究了不同锅支架高度对燃气灶性能的影响规律。结果表明：随着锅支架高度增加,外圈火焰的内焰温度升高、长度变化不大,外圈火焰的外焰温度变化不大、长度增加；内圈火焰的内焰温度下降、长度变短,内圈火焰的外焰温度与长度变化无差异；CO浓度呈线性下降趋势。内外圈火孔皆存在时,热效率随锅支架高度增加先下降后上升,而后持续下降,最佳锅支架高度为19mm,其热效率为62.43%,CO浓度为265.2ppm；只存在外圈火孔时,热效率随锅支架高度增加持续下降,最佳锅支架高度为15mm,其热效率为63.43%,CO浓度为285.6ppm。

英文摘要:

      The numerical model of burning process in domestic gas stove is established according to the component transport and reaction model. The turbulent is modeled with Realizable k-ε; the radiation is modeled with DO; the combustion is modeled with ED. The burning processes of gas stove in different operating conditions are simulated to discuss the effects of pan bracket height on the gas stove performance. When the height of pan bracket is increased, for the fire from outer holes, the temperature of inner flame and length of outer flame increase, while the temperature of outer flame and length of inner flame change little; for the fire from inner holes, the temperature and length of inner flame decrease, while the temperature and length of outer flame change little; CO concentrations show a linear decline. When both inner and outer fire holes exist, the thermal efficiency firstly decreases, then increases, finally decreases with the increasing of pan bracket height, the optimum pan bracket height is 19mm with the thermal efficiency of 62.43% and the CO concentration of 265.2ppm. When only outer fire holes exist, the thermal efficiency decreases continuously with the increasing of pan bracket height, the optimum pan bracket height is 15mm with the thermal efficiency of 63.43% and the CO concentration of 285.2ppm.